PROFILE DETAILS
Dr. Muhammad Mostafa Kamal Bhuiya
Professor
E-mail Address
About Myself
Professor Dr. Muhammad Mostafa Kamal Bhuiya
Head, Department of Mechanical Engineering
Chittagong University of Engineering & Technology (CUET)
Professor Dr. Muhammad Mostafa Kamal Bhuiya is a highly esteemed higher education leader with extensive international experience and a proven track record of excellence in both academia and industry. Currently, he serves as the Head of the Department of Mechanical Engineering at CUET. Previously, he held the position of Head of the Department of Petroleum and Mining Engineering (PME) at CUET.
As a Full Professor of Mechanical Engineering, Dr. Bhuiya has made substantial contributions to Mechanical Engineering, enhancement of heat transfer, renewable energy, biofuels, engineering education, and academic leadership. He offers lectures in various undergraduate courses. His current research project focuses on advanced second- and third-generation biodiesel feedstocks for future transport fuels. Dr. Bhuiya's prolific scholarly work includes over 85 high-impact publications in peer-reviewed journals and conference proceedings.
Professional and Research Experience Highlights
- Proven excellence in senior academic leadership
- Distinguished achievements in research and academic innovation
- Recognized among the “World’s Top 2% Research Scientists” by Elsevier and Stanford University (2021–2024)
- Nominated for the “Best Research Publication Award” (2019) by the Faculty of Mechanical Engineering, CUET
- Published over 50 peer-reviewed journal articles and 30+ international conference papers
- Research impact: H-index: 31+, i10-index: 40+, Citations: 4,000+
- Strategic decision-making with a focus on transformative outcomes
- Expertise in leading high-impact research initiatives and consultation
- Leadership in change management and large-scale team development
- Strong stakeholder engagement and industry collaboration
Field of Interest
Research Areas
- Renewable Energy Technologies, Alternative Fuel, Biofuel
- Energy Efficiency and Energy Conversion
- Thermo-Fluid Flow Processes, Enhancement of Heat Transfer
- Engineering Design and Management
Qualification
Education
-
Doctor of Philosophy (PhD) in Mechanical Engineering
Research Area: Biofuel (Advanced Biodiesel)
Research Topic: “An Experimental Study of 2nd Generation Biodiesel as an Alternative Fuel for Diesel Engine”
School of Engineering and Technology, CQUniversity, Rockhampton, Queensland 4702, Australia
-
Master of Science (MSc) in Mechanical Engineering
Research Area: Heat Transfer (Enhancement of Heat Transfer)
Research Topic: “An Experimental Study of Heat Transfer in Turbulent Flow through a Tube with Perforated Rectangular Strip Inserts”
Bangladesh University of Engineering & Technology (BUET), Dhaka 1000, Bangladesh
-
Bachelor of Science (BSc) in Mechanical Engineering
Research Topic: “Design, Fabrication and Performance Test of a Downdraft Gasifier”
Chittagong University of Engineering & Technology (CUET), Chattogram 4349, Bangladesh
Publications
| Serial No | Title | Authors | Informations | Year |
|---|---|---|---|---|
| 1 | Theoretical and Experimental Analysis of Engine Performance and Emissions Fuelled with Jojoba Biodiesel | A. G. M. B. Mustayen, M. G. Rasul, Xiaolin Wang, M. M. K. Bhuiya, Michael Negnevitsky and James Hamilton | Energies, an MDPI open-access journal, 15 (2022) 6282 (IF = 3.25). | 2022 |
| 2 | Design of a stand-alone energy hybrid system for a makeshift health care center: A case study | Tamal Chowdhury, Hemal Chowdhury, Samiul Hasan, Md Salman Rahman, M. M. K. Bhuiya, Piyal Chowdhury | Journal of Building Engineering, 40 (2021) 102346 (IF = 6.7). | 2021 |
| 3 | Energy, emission, profitability, and sustainability analyses of a grid-connected solar power plant proposed in airport sites of Bangladesh: a case study | Hemal Chowdhury, Tamal Chowdhury, Nazia Hossain, Piyal Chowdhury, Jefferson dos Santos Mascarenhas, Muhammad Mostafa Kamal Bhuiya | Environmental Science and Pollution Research 28 (2021) 61369–61379 (IF = 5.8). | 2021 |
| 4 | Enhancement of Mixing Performance of Two-Layer Crossing Micromixer through Surrogate-Based Optimization | Shakhawat Hossain, Nass Toufiq Tayeb, Farzana Islam, Mosab Kaseem, P.D.H. Bui, M. M. K. Bhuiya, Muhammad Aslam and Kwang-Yong Kim | Micromachines, an MDPI open-access journal, 12 (2021) 211 (IF. = 3.0) | 2021 |
| 5 | Biodiesel production and characterisation of poppy (Papaver somniferum L.) seed oil methyl ester as a source of 2nd generation biodiesel feedstock | M. M. K Bhuiya, M Rasul, M Khan, N Ashwath | Industrial Crops and Products, 152 (2020), 112493 (IF: 5.9) | 2020 |
| 6 | Influence of perforated triple twisted tape on thermal performance characteristics of a tube heat exchanger | M. M. K Bhuiya, MM Roshid, MMM Talukder, MG Rasul, P Das | Applied Thermal Engineering, 167 (2020), 114769 (IF: 6.4) | 2020 |
| 7 | Comparison of oil extraction between screw press and solvent (n-hexane) extraction technique from beauty leaf (Calophyllum inophyllum L.) feedstock | M. M. K Bhuiya, M Rasul, M Khan, N Ashwath, M Mofijur | Industrial Crops and Products, 144 (2020), 112024 (IF: 5.9) | 2020 |
| 8 | A mini-review on the cold flow properties of biodiesel and its blends | Md Mofijur Rahman, Mohammad G. Rasul, Md Masud Khan, Md Abul Kalam Azad, Muhammad M. Bhuiya | Frontiers in Energy Research - Bioenergy and Biofuels section Bioenergy and Biofuels 8 (2020) 598651 (Doi: 10.3389/fenrg.2020.598651) (IF: 3.4) | 2020 |
| 9 | Jute fiber-reinforced polymer composites: a comprehensive review | M S RABBI, TANSIRUL ISLAM & M M K BHUIYA | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3) (2020), 3053–3072 | 2020 |
| 10 | Performance and emission characteristics of a compression ignition (CI) engine operated with beauty leaf biodiesel | M. Bhuiya, M Rasul, M Khan, N Ashwath | Energy Procedia, 160 (2019), 641-647 (IF: 1.15) | 2019 |
| 11 | CFD study of heat transfer enhancement and fluid flow characteristics of laminar flow through tube with helical screw tape insert | M Tusar, K Ahmed, M Bhuiya, P Bhowmik, M Rasul, N Ashwath | Energy Procedia, 160 (2019), 699-706 (IF: 1.15) | 2019 |
| 12 | Performance and emission characteristics of binary mixture of poppy and waste cooking biodiesel | M. Bhuiya, M Rasul, M Khan, N Ashwath | Energy Procedia, 110 (2017), 523-528 (IF: 1.15) | 2017 |
| 13 | Perspectives on 2nd generation biodiesel as a sustainable fuel - Part: 1 Feedstocks, oil extraction techniques and conversion technologies | M. M. K. Bhuiya, M. G. Rasul, M. M. K. Khan, A. K. Azad | Renewable & Sustainable Energy Reviews, 55 (2016) 1109-1128 (IF: 16.799) | 2016 |
| 14 | Perspectives on 2nd generation biodiesel as a sustainable fuel - Part: 2 Properties, performance and emission characteristics | M. M. K. Bhuiya, M. G. Rasul, M. M. K. Khan, A. K. Azad | Renewable & Sustainable Energy Reviews, 55 (2016) 1129-1146 (IF: 16.799) | 2016 |
| 15 | Heat transfer augmentation in a circular tube with perforated double counter twisted tape inserts | M. M. K. Bhuiya, A. K. Azad, M. S.U. Chowdhury, M. Saha | International Communications in Heat & Mass Transfer, 74 (2016) 18-26 (IF: 7.0) | 2016 |
| 16 | Heat transfer performance evaluation and prediction of correlation for turbulent flow through a tube with helical tape inserts at higher Reynolds number | M. M. K. Bhuiya, M. S.U. Chowdhury, J. U. Ahamed, A. K. Azad | Heat & Mass Transfer, 52(6) (2016) 1219-1230 (IF: 5.2) | 2016 |
| 17 | Role of biofuel and their binary (diesel–biodiesel) and ternary (ethanol–biodiesel–diesel) blends on internal combustion engines emission reduction | M. Mofijur, M. G. Rasul, J. Hyde, A. K. Azad, R. Mamat, M. M. K. Bhuiya | Renewable & Sustainable Energy Reviews, 53 (2016) 265-278 (IF: 16.799) | 2016 |
| 18 | Prospects, feedstocks and challenges of biodiesel production from beauty leaf oil and castor oil: A nonedible oil sources in Australia | A. K. Azad, M.G. Rasul, M. M. K. Khan, Subhash C. Sharma, M. Mofijur, M. M. K. Bhuiya | Renewable & Sustainable Energy Reviews, 61 (2016) 302–318 (IF: 16.799) | 2016 |
| 19 | Recent development of biodiesel combustion strategies and modelling for compression ignition engines | A. K. Azad, M. G. Rasul, M. M. K. Khan, S. Sharma, M. M. K. Bhuiya | Renewable & Sustainable Energy Reviews, 56 (2016) 1068-1086 (IF: 16.799) | 2016 |
| 20 | A review on socio-economic aspects of sustainable biofuels | Abul Kalam Azad, Mohammad G. Rasul, M. Masud K. Khan, Subhash C. Sharma, M. M. K. Bhuiya | International Journal of Global Warming, 10 (1-3) (2016) 32-54 (IF: 1.0) | 2016 |
| 21 | Heat transfer characteristics of a parallel miniature heat pipe system | Mohammad Mamunur Rahman, Manabendra Saha, Muhammad Mostafa Kamal Bhuiya, Auvi Biswas, Md. Hasibul Alam, Chowdhury Md. Feroz | International Communications in Heat & Mass Transfer, 79 (2016) 1–8 (IF: 7.0) | 2016 |
| 22 | Role of Biofuels on IC Engines Emission Reduction | M. Mofijur, M.G. Rasul, J. Hyde, M. M. K. Bhuiya | Energy Procedia, 75 (2016) 886-892 (IF: 1.15) | 2016 |
| 23 | Optimisation of Oil Extraction Process from Australian Native Beauty Leaf Seed (Calophyllum inophyllum) | M. M. K. Bhuiya, M. G. Rasul, M. M. K. Khan, A. K. Azad, M. Mofijur | Energy Procedia, 75 (2015) 56-61 (IF: 1.15) | 2015 |
| 24 | Energy and Waste Management for Petroleum Refining Effluents: A Case Study in Bangladesh | A. K. Azad, M. G. Rasul, M. Mofijur, M. M. K. Bhuiya, Sukanta Kumar Mondal and M. Kafilur Sattar | International Journal of Automotive and Mechanical Engineering (IJAME), 11 (2015) 2170-2187 | 2015 |
| 25 | Second generation biodiesel: potential alternative to-edible oil-derived biodiesel | M. M. K. Bhuiya, M. G. Rasul, M. M. K. Khan, A. K. Azad, M. Mofijur | Energy Procedia, 61 (2014)1969-1972 (IF: 1.15) | 2014 |
| 26 | Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts | M. M. K. Bhuiya, M. S. U. Chowdhury, M. Shahabuddin | International Communications in Heat & Mass Transfer, 50 (2014) 25-33 (IF: 7.0) | 2014 |
| 27 | Performance of turbulent flow heat transfer through a tube with perforated strip inserts | M. M. K. Bhuiya, J. U. Ahamed, M. A. R. Sarkar, B. Salam, A. S. M. Sayem | Heat Transfer Engineering, 35(1) (2014) 43-52 (IF: 2.3) | 2014 |
| 28 | Design and performance of a multidimensional automatic solar tracking system | Umme Mumtahina, M. M. K. Bhuiya, A. S. M. Sayem, A. K. Azad, N. Mohammad | International Journal of Energy & Technology, 6 (11) (2014) 1 –6 | 2014 |
| 29 | Modelling of renewable energy economy in Australia | A. K. Azad, M. G. Rasul, M. M. K. Khan, Anis Omri, M. M. K. Bhuiya, M. A. Hazrat Ali | Energy Procedia, 61 (2014) 1902-1906 (IF: 1.15) | 2014 |
| 30 | Energy recovery from biomass by fast pyrolysis | J. Ward, M.G., Rasul, M. M. K. Bhuiya | Procedia Engineering, 90 (2014) 669-674 | 2014 |
| 31 | Modelling of engine Performance fuelled with second generation biodiesel | C. A., Harch, M. G., Rasul, N. M. S, Hassan, M. M. K., Bhuiya | Procedia Engineering, 90 (2014) 459-465 | 2014 |
| 32 | Utilization of polymer wastes as transport fuel resources a recent development | M. A. Hazrat, M. G. Rasul, M. M. K. Khan, A. K. Azad, M. M. K. Bhuiya | Energy Procedia, 61 (2014) 1681-1685 (IF: 1.15) | 2014 |
| 33 | Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts | M. M. K. Bhuiya, M. S. U. Chowdhury, M. Saha, M. T. Islam | International Communications in Heat & Mass Transfer, 46 (2013) 49-57 (IF: 7.0) | 2013 |
| 34 | Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts | M. M. K. Bhuiya, M. S. U. Chowdhury, M. Shahabuddin, M. Saha, L.A. Memon | International Communications in Heat & Mass Transfer, 48 (2013) 124-132 (IF: 7.0) | 2013 |
| 35 | Comparative tribological investigation of bio-lubricant formulated from a non-edible oil source (Jatropha oil) | M. Shahabuddin, H.H. Masjuki, M.A. Kalam, M.M.K. Bhuiya, H. Mehat | Industrial Crops and Products, 47 (2013) 323– 330 (IF: 5.9) | 2013 |
| 36 | Heat transfer enhancement in a tube using rectangular-cut twisted tape insert | Bodius Salam, Sumana Biswas, Shuvra Saha, Muhammad Mostafa K Bhuiya | Procedia Engineering, 56 (2013) 96 – 103 | 2013 |
| 37 | Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts | M. M. K. Bhuiya, J. U. Ahamed, M. S. U. Chowdhury, M. A. R. Sarkar, B. Salam, R. Saidur, H. H. Masjuki, M. A. Kalam | International Communications in Heat and Mass Transfer, 39 (2012) 94-101 (IF: 7.0) | 2012 |
| 38 | Heat transfer performance for turbulent flow through a tube using double helical tape inserts | M. M. K. Bhuiya, M. S. U. Chowdhury, J. U. Ahamed, M. A. R. Sarkar, M. J. H. Khan, M. A. R. Sarkar, M. A. Kalam, H. H. Masjuki, M. Shahabuddin | International Communications in Heat and Mass Transfer, 39 (2012) 818-825 (IF: 7.0) | 2012 |
| 39 | Heat transfer performance evaluation for turbulent flow through a tube with twisted wire brush inserts | M. M. K. Bhuiya, M. S. U. Chowdhury, M. Islam, J. U. Ahamed, M. J. H. Khan, M. R. I. Sarker, M. Saha | International Communications in Heat & Mass Transfer, 39 (2012) 1505–1512 (IF: 7.0) | 2012 |
| 40 | Heat transfer and pressure drop characteristics in turbulent flow through a tube | M. M. K. Bhuiya, J. U. Ahamed, M. A. R. Sarkar, B. Salam, A. S. M. Sayem, M. A. Kalam | Experimental Heat Transfer, 25 (2012) 301–322 (IF: 3.5) | 2012 |
| 41 | A Concurrent Application Of NPV, IRR, MIRR, And Dynamic Programming Model For Finding Out The Replacement Period Of Public Buses | M. Ali1, J.U. Ahamed, M. A. Alim and M. M. K. Bhuiya | Engineering e-Transaction (ISSN 1823-6379), 6(2) (2011) 81-89 | 2011 |
| 42 | An experimental investigation into biodiesel stability by means of oxidation and property determination | M. Shahabuddin, M.A. Kalam, H.H. Masjuki, M. M. K. Bhuiya, M. Mofijur | Energy, 44 (2012) 616- 622 (IF: 9.0) | 2012 |
| 43 | Performance of a multidimensional automatic solar tracking system | M. M. K. Bhuiya, J. U. Ahamed, M. M. Uddin, A. Hakim, M. R. T. Hossain | Engineering e-Transaction (ISSN 1823-6379), 6 (1) (2011) 55-60 | 2011 |
| 44 | Analysis of combustion product for modified high-speed diesel combustion model of PCI engine for after treatment System | A. S. M. Sayem, J. U. Ahamed, M. M. K. Bhuiya, Prasanjit Das | International Journal of Mechanical & Materials Engineering (IJMME), 6(1) (2011) 120-125 | 2011 |
| 45 | MHD Mixed convection heat transfer enhancement in a lid-driven enclosure having a heat-generating body: aspect ratio and Prandtl number effect | M. M. Billah, M. M. Rahman, J. U. Ahamed, M. M. K. Bhuiya | International Journal of Energy & Technology, 3 (13) (2011) 1–8 | 2011 |
| 46 | Computational study of supersonic flow through a converging diverging nozzle | M. S. U. Chowdhury, J. U. Ahamed, P. M. O. Faruque, M. M. K. Bhuiya | Engineering e-Transaction (ISSN 1823-6379), 6(1) (2011) 37- 42 | 2011 |
| 47 | Forced convection heat transfer performance of porous twisted tape insert | J. U. Ahamed, M. M. K. Bhuiya, R. Saidur, H. H. Masjuki, M. A. R. Sarkar, A. S. M. Sayem, M. Islam | Engineering e-Transaction (ISSN 1823-6379), 5(2) (2010) 67-79 | 2010 |
| 48 | Microcontroller based traffic rules violation monitoring and reporting system using wireless communication | M. R. T. Hossain, M. M. K. Bhuiya, T. H. Bhuiyan, S. Bhowmik, J. U. Ahamed | Engineering e-Transaction (ISSN 1823-6379), 5(2) (2010)117-121 | 2010 |
| 49 | Home appliances control system by cell phone | M. M. K. Bhuiya, M. A. Islam, S. C. Banik, A. Gaffer, M. R. T. Hossain, A. S. M. Sayem | Mechanical Engineering Research Journal (ISSN 1990-5491), 7 (2010) 77-80 | 2010 |
| 50 | Effect of adjacent tubes on pressure distributions around a horizontal tube | S. Biswas, B. Salam, M. Islam and M. M. K. Bhuiya | Mechanical Engineering Research Journal (ISSN 1990-5491), 7 (2010) 3-11 | 2010 |
| 51 | Investigate the effect of high speed on engine performance using high- speed combustion model for PCI engine | A. S. M. Sayem, Prasanjit Das, M. M. Kamal Bhuiya and M. T. Islam | Mechanical Engineering Research Journal (ISSN 1990-5491), 7 (2010) 54-62 | 2010 |
| 52 | Design and comparative study of thermoelectric refrigeration system | M. M. Uddin, M. M. K. Bhuiya, M. T. Islam and M. S. Uddin | Mechanical Engineering Research Journal (ISSN 1990-5491), 6 (2008) | 2008 |
| 53 | Pyrolysis of polypropylene using infrared heat source and characterization of the pyro-oil | Arnab Dutta and Muhammad Mostafa Kamal Bhuiya | 7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE 2023), Paper ID: 58, Chattogram, Bangladesh | 2023 |
| 54 | Optimized production of biodiesel from arjun oil | Dadul Shahriar Sagor and Muhammad Mostafa Kamal Bhuiya | 6th International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021), Paper ID: 72, Chattogram, Bangladesh | 2021 |
| 55 | Numerical and experimental analysis of fluid flow and mixing investigation on overlapping serpentine micromixer | Farzana Islam, Bui Duc Hong Phuc, Muhammad Tabish Niaz, Muhammad Mostafa Kamal Bhuiya and Shakhawat Hossain | 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE 2019), Paper ID: 161, Chattogram, Bangladesh | 2019 |
| 56 | Numerical investigation on the thermal performance of a tube with twisted tapes, perforated twisted tapes, rectangular-cut perforated twisted tapes and v-cut perforated twisted tapes: a comparative study | Abir Saha, Jamal Uddin Ahamed, Ahmad Abdullah Mujahid and Muhammad Mostafa Kamal Bhuiya | 6th International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021), Paper ID: 55, Chattogram, Bangladesh | 2021 |
| 57 | Design and fabrication of an automatic braking system | Jamil Uddin Murad and Muhammad Mostafa Kamal Bhuiya | 6th International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021), Paper ID: 59, Chattogram, Bangladesh | 2021 |
| 58 | Biodiesel production from non-edible tung (vernicia fordii) seed oil | Rahiqul Islam Efaz, Muhammad Mostafa Kamal Bhuiya, Jamil Uddin Murad and Saikat Pal | 6th International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021), Paper ID: 131, Chattogram, Bangladesh | 2021 |
| 59 | Production of biodiesel from non-edible neem oil | Ahsan Habib, Muhammad Mostafa Kamal Bhuiya, Bijoy Mallick, Md. Fahel, Bin Noor, Sanjoy Halder | 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE 2019), Paper ID: 166, Chattogram, Bangladesh | 2019 |
| 60 | Biodiesel production from castor seed oil as an alternative fuel for the compression ignition (CI) engine | Ahsan Habib, Muhammad Mostafa Kamal Bhuiya, Md. Fahel Bin Noor, Bijoy Mallick | 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE 2019), Paper ID: 186, Chattogram, Bangladesh | 2019 |
| 61 | Augmentation of heat transfer using coiled perforated twisted tape insert | Zahid Parvez, M. M. K. Bhuiya, Bodius Salam | 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE 2019), Paper ID: 187, Chattogram, Bangladesh | 2019 |
| 62 | Design and fabrication of an automatic solar panel cleaning system | Md. Omar Faruque, Muhammad Mostafa Kamal Bhuiya, Salman Ahmed, Fahad Munshe | 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE 2019), Paper ID: 202, Chattogram, Bangladesh | 2019 |
| 63 | Experimental investigation of heat transfer enhancement with perforated triangular shape twisted tape insert | Deepto Roy, Zahid Parvez, Muhammad Mostafa Kamal Bhuiya, Bodius Salam, Md. Maruf Billah | 5th International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE 2019), Paper ID: 223, Chattogram, Bangladesh | 2019 |
| 64 | Ternary or binary blend? A case study using papaya seed oil biodiesel | Mohammad Anwar, Mohammad G. Rasul, Nanjappa Ashwath, Muhammad M. K. Bhuiya | 13th International Conference on Mechanical Engineering 2019 (ICME 2019), Paper ID: 178, Dhaka, Bangladesh | 2019 |
| 65 | Cleaning of accumulated dust particle of a flat plate solar collector | AH Limon, M Bhuiya, M Rahman, M Islam | 5th International Conference on Mechanical, Industrial and Energy Engineering 2018 (ICMIEE 2018), Paper ID: ICMIEE18-326, Khulna, Bangladesh, 2018 | 2018 |
| 66 | Pyrolysis of Sawdust for Bio-Oil Production using Infrared Heat Source | MR Islam, M. M. K Bhuiya, B Das, M Rahman, AH Limon | 5th International Conference on Mechanical, Industrial and Energy Engineering 2018 (ICMIEE 2018), Paper ID: ICMIEE18-325, Khulna, Bangladesh, 2018 | 2018 |
| 67 | Comparison of oil refining and biodiesel production process between screw press and n-hexane techniques from beauty leaf feedstock | M. M. K. Bhuiya, M. G. Rasul, M. M. K. Khan, N. Ashwath | AIP Conference Proceedings 1754 (1), 060016 (2016) | 2016 |
| 68 | Effect of first- and second-generation biodiesel blends on engine performance and emission | AK Azad, MG Rasul, M. M. K Bhuiya, R Islam | AIP Conference Proceedings, 1754 (1), 050031 (2016) | 2016 |
| 69 | Recent development in producing biodiesel from non-edible oil feedstocks | M. M. K. Bhuiya, M. G. Rasul, M. M. K. Khan and N. Ashwath | International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013), Paper ID-268, Chattogram, Bangladesh | 2014 |
| 70 | Design and fabrication of a model solar central receiver heating system | B. Mazumder, M. K. Islam, M. M. Rahman, M. M. K. Bhuiya, A. A. Mamoon and T. Ahmed | International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013), Paper ID-221, Chattogram, Bangladesh | 2014 |
| 71 | Beauty leaf oil refining and conversion into biodiesel | M. M. K. Bhuiya, MG Rasul, N Ashwath, MMK Khan | 3rd International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015) 26–29 November 2015, Chattogram, Bangladesh. | 2015 |
| 72 | An experimental study of heat transfer in turbulent flow through a tube with perforated rectangular strip inserts | M. M. K. Bhuiya, M. A. R. Sarkar, B. Salam, J. U. Ahamed, M. A. Kalam, M. J. H. Khan | 4th AUN-SEED Net Regional Conference on Chemical Engineering, OTH-07, Kuala Lumpur, Malaysia | 2012 |
| 73 | Experimental study of wind flow over the surface of an aerodynamic car model | M. S. U. Chowdhury, M. M. K. Bhuiya, M. A. Wazed | 4th International Conference on Mechanical and Electrical Technology, ICMET 2012, Kuala Lumpur, Malaysia | 2012 |
| 74 | Influence of coconut biodiesel and waste cooking oil blended fuels on engine performance and emission characteristics | A. M. Liaquat, H. H. Masjuki, M. A. Kalam, M. M. K. Bhuiya, and M. Varman | Proceedings of the 2012 Fall Conference of the ASME Internal Combustion Engine Division ICEF2012, 2012, Vancouver, BC, Canada (ICEF2012-92131) | 2012 |
| 75 | Experimental investigation of tube side heat transfer enhancement using segmented cross-strip | Sumana Biswas, Bodius Salam and Md. Mostafa kamal Bhuiya | International Conference on Mechanical Engineering & Renewable Energy (ICMERE)–2011, P-146, 2011, CUET, Chattogram, Bangladesh | 2011 |
| 76 | Propane mixture with R22 as an alternative refrigerant for air-conditioning system based on exergy analysis | J. U. Ahamed, R. Saidur, H. H. Masjuki, M. M. K. Bhuiya | International Conference on Mechanical Engineering & Renewable Energy (ICMERE) – 2011, P-071, 2011, CUET, Chattogram, Banglades | 2011 |
| 77 | An experimental investigation of tube side heat transfer enhancement using porous twisted tape inserts | M. M. K. Bhuiya, A. S. M. Ridwan, B. Salam | International Conference on Mechanical, Industrial and Energy Engineering 2010, MIE10-099, Khulna, BANGLADESH | 2010 |
| 78 | Design and fabrication of a model type solar central receiver heating system | M. M. K. Bhuiya, A. S. M. Sayem, J. U. Ahamed, P. Das, G. Mainuddin | Proc. 13th Annual Paper Meet, MED-52, 2010, The Institution of Engineers, Dhaka, Bangladesh | 2010 |
| 79 | Design of a software-controlled vehicle to overcome accident | M. M. K. Bhuiya, M. Sen, J. U. Ahamed, A. S. M. Sayem, G. Mainuddin | Proc. 13th Annual Paper Meet, MED-36, The Institution of Engineers, Dhaka, Bangladesh | 2010 |
| 80 | Design and fabrication of a programmable timer-counter | M. M. K. Bhuiya, G. I. Alam, S. C. Banik, J. U. Ahamed, A. S. M. Sayem | Proc. 13th Annual Paper Meet, MED-37, 2010, The Institution of Engineers, Dhaka, Bangladesh | 2010 |
| 81 | Heat transfer enhancement in a tube using twisted tape insert | B. Salam, S. Biswas, M. M. K. Bhuiya | Proc. 13th Asian Congress of Fluid Mechanics, Vol.-II, pp. 835-838, 2010, Dhaka, Bangladesh | 2010 |
| 82 | Observation of PCI combustion phenomena under variable engine speed by applying tsurushima model | A. S. M Sayem, M. I. Mahmud, P. Das, M. M. K. Bhuiya | International Conference on Mechanical, Industrial and Energy Engineering 2010, MIE10-014, Khulna, BANGLADESH | 2010 |
| 83 | An experimental study of tube-side heat transfer | B. Salam and M. M. K. Bhuiya | Proc. 7th International Conference on Mechanical Engineering 2007, ICME07-TH-11, Dhaka, Bangladesh | 2007 |